1. Double-click the My Computer icon.
2. Double-click the Dial-Up Networking icon.
3. Click the OK button.
4. In the Name the new phonebook entry box, type henricoschools.org.
5. Check the box next to I know all about phonebook entries and would rather edit the properties directly.
6. Click the Finish button.
7. Check the box next to Use Telephony dialing properties.
8. In the Area Code box, type your area code.
9. In the Phone number box, type your local access number. Remember to check with your local telephone company to make sure that the number you choose is a local toll-free call.
10. Uncheck the box next to Use another port if busy.
11. Click on the Server tab.
12. Uncheck the box next to Enable PPP LCP extensions.
13. Click the TCP/IP Settings... button.
14. Click the Specify name server addresses radio button in the PPP TCP/IP Settings area.
15. In the Primary DNS field, type 216.230.0.21.
16. In the Secondary DNS field, type 216.230.0.22.
17. Click the OK button.
18. Click on the Security tab.
19. Click the Accept any authentication including clear text radio button in the Authentication and encryption policy area.
20. Click the OK button.

Reinstalling TCP/IP

Removing TCP/IP

1. Click the Start button, point to Settings, and choose Control Panel.
2. Double-click the Network icon.
3. Select the Protocols tab.
4. Select TCP/IP.
5. Click the Remove button.
6. Click the Yes button.
7. Click the Close button.
8. You will be warned that you have an invalid RAS configuration.
9. Click the OK button.
10. Click the Yes button to restart your computer.

Adding TCP/IP

1. Click the Start button, point to Settings, and choose Control Panel.
2. Double-click the Network icon.
3. Select the Protocols tab.
4. Click the Add button.
5. From the list of Network Protocols, select TCP/IP Protocol.
6. Click the OK button.
7. If you are asked whether you wish to use DHCP, click the No button.
8. You may be prompted for your Windows NT CD-ROM. Make sure the path to the i386 directory on the CD is correct.
9. Click the Continue button.
10. If you are asked whether you would like to configure RAS to support the TCP/IP protocol, click the OK button.
11. Click the Network button.
12. Uncheck NetBEUI.
13. Check TCP/IP.
14. Uncheck IPX.
15. Click the OK button.
16. Click the Continue button.
17. Click the Close button.
18. Click the Yes button to restart your computer.

Reinstalling RAS

Removing RAS

1. Click the Start button, point to Settings, and choose Control Panel.
2. Double-click the Network icon.
3. Select the Services tab.
4. Select Remote Access Service.
5. Click the Remove button.
6. Click the Yes button.
7. Click the Close button.
8. Click the Yes button to restart your computer.

Adding RAS

1. Click the Start button, point to Settings, and choose Control Panel.
2. Double-click the Network icon.
3. Select the Services tab.
4. Click the Add button.
5. From the list of Network services, select Remote Access Service.
6. Click the OK button.
7. You may be prompted for your Windows NT CD-ROM. Make sure the path to the i386 directory on the CD is correct.
8. Click the Continue button.
9. From the RAS Capable Devices drop-down list, choose your modem.
10. Click the OK button.
11. Click the Configure button.
12. Select Dial out only.
13. Click the OK button.
14. Click the Network button.
15. Uncheck NetBEUI.
16. Check TCP/IP.
17. Uncheck IPX.
18. Click the OK button.
19. Click the Continue button.
20. Click the Close button.
21. Click the Yes button to restart your computer.